The MultiCam boardroom needed a white board to facilitate meetings and training programs. Of course, it would need to suit the room. We opted to hide it behind a hatchway. Dan did a little research on the web and scribbled up a design (with plenty of rivets!) in his sketchbook.
Next we created the vector file for the hatch with the drawing tools in EnRoute.
The door was cut from 1.5" thick 30 lbs. Precision Board HDU. A backing layer was cut from 3/4" MDF to add strength. We also welded up a hinged steel bracket from two pieces of angle iron to ensure the door stays attached to the frame. We screwed and glued a sheet of 3/4" plywood to the back of the door frame to make it easy to firmly attachment it to the wall.
